Name: IDS5008F4 8 Gigabit RJ45 Ports + 4 10G SFP+ Slots Layer 3 Managed DIN-Rail Industrial Switch
Brand: Hinet
SKU: IDS5008F4 8 Gigabit RJ45 Ports + 4 10G SFP+ Slots Layer 3 Managed DIN-Rail Industrial Switch

Product Overview

Technical Parameters

Application scenarios

Optional information

File download

Product information

The IDS5008F4 switch is a layer 3 10-gigabit managed industrial rail-mounted switch independently developed by Shenzhen Hinet Industrial Technology Co., Ltd. The IDS5008F4 provides 8 gigabit electrical ports and 4 10-gigabit SFP+ optical ports, supports IEEE802.3/802.3u/802.3x, IEEE802.3ab, IEEE802.3z, and MDI/MDI-X adaptive RJ45 ports. This switch is specifically designed to meet flexible and varied industrial application requirements, providing a cost-effective industrial Ethernet communication solution. The product features high availability, reliability, and security to ensure the transmission of critical data. The IDS5008F4 industrial switch also provides redundant power supply support and a wide range of DC power input. In terms of structure, the IDS5008F4 industrial switch fully considers industrial installation requirements and uses DIN rail or mounting plate installation.

The "HRP Ring" technology is specially designed and developed by Hinet Times for industrial applications. It provides an automatic recovery function after Ethernet disconnection, with a recovery time of less than 20 milliseconds. Users can designate any port (including normal ports and aggregation ports) through the management interface for ring formation, to provide faster recovery speed and higher communication bandwidth.

Product Features

● Complies with IEEE802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z

● Supports 8 10/100/1000TX RJ45 ports and 4 1000M SFP optical ports

● High backplane bandwidth 96Gbps

● Supports standard IP / extended IP / MAC IP / ARP ACL

● IGMP snooping and IGMP query mode for multimedia applications

● Port mirroring and bandwidth control

● IEEE802.3x flow control

● Supports port-based VLAN / 802.1Q tagged VLAN

● Supports IEEE802.3ad port trunking through LACP

● Supports Spanning Tree Protocol IEEE 802.1d

● Supports IEEE 802.1p class of service

● Supports IEEE 802.1x user authentication

● Supports broadcast storm filter

● Supports DHCP server and client

● Supports system event log

● Supports command-line interface management

● Management via Web / SNMP / Telnet / console

● Surge protection for power ports and data ports

● Wide power input: 12~57VDC

● Wide operating temperature: -40~75℃

● IP30 aluminum housing

● MTBF 200,000 hours

● EMI: FCC Part 15. CISPR(EN55022) class A

● EMS: EN61000-4-2(ESD), EN61000-4-3(RS),

● EN61000-4-4(EFT), EN61000-4-5(Surge),

● EN61000-4-6(CS), EN61000-4-6(common mode conduction)

● Industrial: IEC6100-6-2

● Railway: EN50155.EN50121-4

● Transportation: NEMA TS-2

● Warranty: 5 years

Product Attributes
Network Interface	8 x 10/100/1000M RJ45 ports 4 x 10G SFP+ optical ports
Management Interface	Console port
LED Indicators	Power, port speed, port connection
Network Cable
10Base-T	2-pair UTP/STP Cat. 3,4,5/5E,6 cable EIA/TIA-568 100-ohm (100m)
100Base-T	2-pair UTP/STP Cat. 5/5E,6 cable EIA/TIA-568 100-ohm (100m)
1000Base-T	4-pair UTP/STP Cat. 5E,6 cable EIA/TIA-568 100-ohm (100m)
Product Performance
Switching Capacity	96 Gbps
Forwarding Capability	71.4 Mpps
Forwarding Mode	Store and forward
Packet Buffer Memory	12 Mbit
CPU Memory	2G Mbit
Flash Memory	512 Mbit
MAC Address Table	16K
Jumbo Frame	16K
ACL Table	1K
VLAN Quantity	4K
Route Quantity	512
Multicast Table	512
Route Host	512
Routing Table Size	64
Port Priority Queues	8
Physical Properties
Dimensions	148x143x60mm
Operating Temperature	-40 to 75℃
Storage Temperature	-40 to 85℃
Operating Humidity	5 to 95% non-condensing
Voltage Input Range	12-57VDC
Maximum Power Consumption	15W
EMC Safety	FCC, CE, RoHS
Reliability	MTBF200,000
Port Configuration
Enable and Disable	Supports control enable and disable
Auto-Negotiation	Supports forced port mode and speed
Flow Control	Supports IEEE802.3x full duplex Supports half-duplex backpressure
Storm Control	Supports broadcast, multicast and DLF packet rate limiting
Port Mirroring	Supports many-to-one mirroring
Rate Limiting	Supports port input/output rate limiting
Link Aggregation	Supports manual link aggregation Supports LACP Up to 8 maximum aggregation groups, each aggregation group contains up to 8 ports
Aggregation Policy	Source MAC / Destination MAC / Source Destination MAC Source IP / Destination IP / Source Destination IP
Port Protection	Each port can be configured as a protected port isolated from each other
MAC Configuration
MAC Address Table Management	Supports
Transmission Mode	Supports IVL transmission mode
Static MAC Address	Supports
MAC Binding	Supports
MAC Address Filter	Supports
MAC Quantity Limit	Supports limiting the number of MAC addresses learned per port
VLAN Configuration
802.1Q-based VLAN	Supports
MAC-based VLAN	Supports
IP-based VLAN	Supports
Protocol-based VLAN	Supports
Voice VLAN	Supports
Guest VLAN	Supports
Private VLAN	Supports
VLAN Mapping	Support 1:1 mapping
Double VLAN Tagging	Supports basic QinQ
Reliability Protocols
Spanning Tree	Supports STP/RSTP/MSTP
BPDU Protection	Supports
BPDU Filter	Supports
Port Loop Detection	Supports
EAPS Protocol	Supports RFC3619
LLDP Protocol	Supports LLDP and LLDP-MED
UDLD Protocol	Fully compatible with CISCO's UDLD protocol
Layer 3 Routing
ARP	Supports static and dynamic ARP
Static Routing	Supports IPv4 and IPv6 based static routing
VLAN Interface	Supports 32 VLAN interfaces
RIP	Supports RIP v1/v2 & IPv6 RIPng
OSPF	Supports OSPFv2 & IPv6 OSPFv3
BGP	Supports BGP4 & IPv6 BGP4+
Policy Route	Supports
VRRP	Supports
Multicast
PIM-SM	Supports
IGMP	Supports v1/v2/v3
MLD SNOOPING	Supports v1/v2
IGMP SNOOPING	Supports v1/v2/v3
IGMP SNOOPING Querier	Supports
IGMP SNOOPING Fast Leave	Supports
IGMP SNOOPING Filtering	Supports
MVR	Supports
GMRP	Supports
Static Multicast Address	Supports
Unknown Multicast Control	Supports
PIM-SM	Supports
Access Control List (ACL)
Standard IP-based	Supports
Extended IP-based	Supports
MAC IP-based	Supports
MAC ARP-based	Supports
Time-based	Supports
Port Filtering	Supports
Quality of Service (QOS)
Scheduling Mode	Supports WRR, SP, WFQ
Port-based Scheduling	Supports
802.1p-based Scheduling	Supports
DSCP (DiffServ)-based Scheduling	Supports
ACL Data Flow-based Scheduling	Supports
QoS Policy	Supports packet mapping to corresponding output queues Supports modifying COS and DSCP flags of packets Supports data flow rate limiting Supports data flow statistics Supports data flow mirroring
Security
Administrative Security	Supports starting and stopping TELNET, WEB and SNMP services Supports TELNET, WEB and SNMP service binding with standard IP ACL Supports controlling the number of TELNET users
CPU Protection	Switch self-security protection, prohibits traffic attacks
IP-MAC Address Binding	Supports static configuration of binding between IP, MAC and port
AAA	Supports 802.1x protocol Supports RADIUS protocol Supports RADIUS server authentication authorization and accounting Supports MAC-based 802.1X authentication. Supports 802.1x guest VLAN
DHCP Snooping	Supports dynamic ARP binding to prevent ARP spoofing Supports dynamic IP, MAC port binding Supports fixed port connection to DHCP server, prevents private connection to DHCP server
ARP Spoofing Prevention	Supports manual configuration of MAC ARP-based ACL rules to prevent ARP spoofing Supports DHCP SNOOPING function, when DHCP obtains IP address, dynamically binds ARP and port to prevent ARP spoofing
Management Functions
CLI Management	Supports serial port management Supports TELNET management Supports SSH management
WEB Management	Supports
SNMP Management	Supports SNMP protocol Supports SNMP TRAP Supports standard and private MIB
User Management	Supports multi-user management
Display CPU Utilization	Supports
Display Memory Utilization	Supports
Log Management	Supports
RMON	Supports RMON groups 1,2,3,9
Configuration Download/Upload	Supports
Firmware Upgrade	Supports
Timer Management	Supports local timer management Supports SNTP protocol for clock acquisition
Debugging Tools

Switch Model
IDS5008F4	Layer 3 Managed 8-Port Gigabit DIN-Rail Industrial Switch with 4 10G SFP+ Ports
SFP Module
XGSFP-RJ45	10G SFP Module, RJ45 Port
XGSFP-M-LC-01	10G SFP Module, Multimode, 100m, 850nm, LC
XGSFP-S-LC-10	10G SFP Module, Single-mode, 10km, 1310nm, LC
XGSFP-S-LC-40	10G SFP Module, Single-mode, 40km, 1310nm, LC
XGSFP-S-LC-80	10G SFP Module, Single-mode, 80km, 1550nm, LC